|
Heavy
Duty
Perimeter Frame
Hood:
This 71-74 AMX-Javelin Javelin Hood has been manufactured as close to original factory specifications as
possible. Today's advanced manufacturing techniques makes it
possible to produce a straighter, more rigid part than those made in
the 60's and 70's. You will also find it's fit, finish and functionality will
give you what your missing for your restoration or performance project.
This hoods under support frame is about
10" wide around the perimeter of the under side of the hood.
Steel inserts installed for easy installation.
|
|
|
Light Weight
Pin On Hood: This
71-74 AMX-Javelin Javelin Hood is solely
designed for applications where weight reduction is an important factor for
competition and winning is the
#1 goal.
The light weight pin-on design does not utilize either the hinge or latch, but
requires the use of fasteners on all four sides.
Our light weight hoods will scale in a few pounds heavier than
competition parts made by others, however we feel that by adding a
little more material, your new hood will maintain its fit and
shape indefinitely. |
|
 |
|
|
The inner finish is
black lacquer with no
cross braces to get in the way. This hood will use the original hinge.
The surface finish is a sandable gray gellcoat, allowing
for easier sanding and prep work. |
|
<<
Typical
Heavy Duty hood inner. |
|
|
 |
|
|
This hood is strong, straight and professionally braced for lift off use with a 9# high
density foam which is fiberglass encased to provide maximum strength
and durability, for years to come. |
<<
Typical Pin On hood inner. |
|
|
